HP Designjet Z5200 Einführende Informationen Seite 6

3. With both hands, push the spindle into both roll holders at the same time. The spindle snaps into place.
4. If the edge of the roll is torn (sometimes due to tape used to hold the end of the roll) or not straight, pull the
paper slightly beyond the cutting groove and use a cutter to cut a straight edge.
Cut the paper as straight as possible, as uneven paper does not load correctly.
5. Insert the edge of the paper into the feeder.
Do not push your fingers inside the printer's paper path.
5 Introductory Information