Warnings - Assembly Text Instructions - Maintenance - Extremis Anker Bedienungsanleitung

Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
• Do not use any sharp tools to open the
packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Do not put out cigarettes on the table.
• Not grafitti proof.
• Do not leave children unattended whilst playing
on the table.
• To avoid danger of suffocation, keep plastic bags
away from babies and children.
• Colours can differ over years and from batch to
batch.
Product
• Do not stand or jump on the table.
• Do not drag the table, but carry it with minimum
2 people.
• Anchoring the product has to be done by
qualified people.
• For anchoring: use suitable bolts or screws from
a specialized store depending on the material
your terrace is made of.
• Clean the flat part of the legs regularly.
• Do not put your fingers in the holes of the
tabletop.
• Max. 3 people or 240 kg per bench.
Wood
• When delivered, the wood is untreated.
• Wood is a natural material and its look is different
for every slat, plank and tree.
• Wood will gradually become rougher and start
to turn grey as a consequence of exposure to the
sun and rain. We recommend oiling the wood
once or twice a year. 1x before the Summer and 1x
after the Summer as protection for the Winter.
• Cleaning regularly with mild detergent. Never use
a high pressure cleaner as this will roughen the
wood's smooth surface and irreparably damage
the wood's fibress.
• Thorough cleaning with Extremis Wood Cleaner.
• We strongly recommend that you treat your wood
with wood oil to protect it from stains - Small
cracks and crevices can also appear as part of
this process. We strongly advise everyone to treat
the furniture with our Wood Protector. It is best to
16
repeat this treatment each year.
Galvanised steel
• Galvanisation will become less shiny when used
outdoors.
• Flame retarding - NEN-EN13501-1 A1 - Class A1
products will not contribute to fire in any stage,
including fully developed fire. For this reason,
they are assumed to be capable of satisfying all
requirements of all lower classes as well.
• Possible impurities in the immersion tank can
cause black marks during galvanization, which
are intrinsic to this industrial finishing technique.
• White marks on this zinc layer are also intrinsic
to this procedure and will disappear when the
furniture is put outdoors.
• This industrial finishing technique may result in a
rougher surface. This is intrinsic to the process.
Powder-coating
• White powder-coating requires more
maintenance.
• Do not use abrasive scouring powders or
scourers as they will scratch the surface.
• Colour can fade to some extent when exposed to
UV.
• Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
• Dark colors can get very hot in sunny weather.
ASSEMBLY INSTRUCTIONS
Anker - p6
1. a. Mount the table leg to the bench leg with two
M8 x 20 countersunk bolts. Tip: Place the bench
leg on its side on the floor (using the packaging
to protect it).
b. Mount the optional floor anchor between the
table leg and the bench leg with two M8 x 20
countersunk bolts, as shown in the drawing. Tip:
Place the bench leg on its side on the floor (using
the packaging to protect it).
2. Place the assembled legs in a triangle with the
leg tubes pointing inwards, as shown in the
drawing.
3. Postion the bench between the legs and mount it
to the legs with two M10x25 carriage bolts, two