What You Need; Assembly Hopper - Extremis Hopper AA Montageanleitung

ASSEMBLING HOPPER

WHAT YOU NEED

2 people
extremis key
s
ex tre mi
screwdriver
+/- 45 min.
2. Remove the four screws from the two boards that prevent the table legs from moving during transport. Fold down the cardboard
flaps to have better access to the table legs. Take them out of the box and position them as shown in the drawing. Depending on
the size of the table put them two by two 2 m (table for 4 people), 2.6 m (table for 6 people), 3.2 m (table for 8 people), or 3.8 m (table
for 10 people) apart.
3. Put the lid back on the box and put the 2 boards mentioned in step 2 on top of the lid. The box is now located centrally with respect
to the four table legs.
4

assembly hopper

1. Remove the lid of the box containing the table legs. This is
the box on the wooden pallet. To this end, just cut the pallet
straps. The packaging material must stay intact for the rest
of the assembly!