ResMed ClimateLineAir Bedienungsanleitung Seite 6

If you have been using Climate Control Manual and want to
return to Climate Control Auto, follow the instructions below.
To change to Climate Control Auto:
1. In My Options, turn the dial to highlight Climate Ctrl and
then press the dial.
2. Turn the dial to select Auto and then press the dial to save
the change.
It is important that you regularly clean your air tubing to make
sure you receive optimal therapy. The following sections will
help you with disconnecting, cleaning, checking and
reconnecting your air tubing.
Disconnecting
1. Hold the cuff of the air tubing, apply gentle pressure to the
release buttons and pull it away from the device.
2. Hold both the cuff of the air tubing and the swivel of the
mask, then gently pull apart.
Note: Only hold and pull the cuff of the air tubing. Do not hold
or pull the tubing itself as it may cause damage.
English 5