Copying A Video Tape; A Status Display - Clatronic vcr d 620 Bedienungsanleitung

H97A6ED(EN).fm Page 16 Wednesday, March 24, 2004 9:44 AM

Copying a Video Tape

Connect the recording DVD/VCR (this unit), playing VCR
(another VCR) and your TV as outline in the following
diagrams.
Using scart jacks
Playing VCR
to 21-Pin Scart jack
DVD
DIGITAL ANALOG
AUDIO OUT AUDIO OUT
OPTICAL COAXIAL
Using AV front terminals
to the video output jack
to the audio output jack
Recording DVD/VCR (this unit)
FUNCTION
REW F.FWD STOP/EJECT PLAY REC/OTR
to 21-Pin Scart jack
1) Insert a pre-recorded videocassette into the playing VCR.
2) Insert video cassette tape with its erase prevention tab in
place into the cassette compartment of the recording
DVD/VCR.
3) Press SPEED/SYSTEM to select the desired recording
speed (SP/LP).
4) Select "AV2" or "AV3" position on the recording DVD/
VCR.
See "External Input Mode (for VCR features)" (Refer to
page 8).
5) Press REC/OTR on the recording DVD/VCR.
6) Begin playback of the tape in the playing VCR.
Recording DVD/VCR
(this unit)
AERIAL
S-VIDEO
OUT
VCR AV2 (DECODER)
L
DVD/VCR AV1 (TV) RF OUT
R
to 21-Pin Scart jack
(TV)
Playing VCR
OPEN/CLOSE
OUTPUT
VCR DVD DISC IN
STOP PLAY
CHANNEL SKIP SKIP
REV FWD
to AV1 (TV)
Scart jack on
the back of the
DVD/VCR
(TV)
16
7) To stop recording, press STOP/EJECT
DVD/VCR, then stop playback of the tape in the playing
VCR.
Note: • For best results during dubbing, use the DVD/VCR's
front panel controls whenever possible. The remote
control might affect the playing VCR's operation.
•
If video or colour fades in and out, you may be
copying a copy guarded video tape.
• Unauthorised recording of copyrighted materials may
infringe on the rights of copyright owners, violate
copyright laws and may not record clearly.

A Status Display

To check the Counter, or Clock & Channel number, press
DISPLAY DISPLAY
. Each time you press
change as illustrated:
When you select the channel using the
the desired channel (position number).
<OFF mode> <COUNTER mode>
■
SP
Press once.
0:12:34
Press once.
Note:
If the on screen display or indicators on the front panel
show an abnormal reading or no reading, unplug this
unit for 30 seconds, then replug it again.
Please note that language, clock, and timer settings will
be cleared after disconnection.
on the recording
, TV screen will
number buttons
, select
<CLOCK and CHANNEL
NUMBER mode>
■
17:40
SP
P02
Press once.
EN