For Better Sound (For Dvd Features) - Clatronic vcr d 620 Bedienungsanleitung

H97A6ED(EN).fm Page 7 Wednesday, March 24, 2004 9:44 AM
If your TV has no scart input jack but has an
S-VIDEO input jack,
1) Follow the steps 1) 3)
to above.
2) Connect the S-VIDEO OUT jack on this unit to the
S-VIDEO input jack on your TV.
3) Connect the analog AUDIO OUT jacks of this unit to
the analog audio input jacks of your TV.
4) Plug in the TV and this unit.
Note: The S-VIDEO connection only supplies video (picture)
in the DVD mode. Therefore, video channel setting is
necessary for watching videotapes. For more details,
refer to page 8.
TV
DVD / VCR
DIGITAL
AUDIO OUT
OPTICAL COAXIAL
If your TV has no VIDEO input jacks,
1) Follow the steps 1) 3)
to and
to a TV."
2) Video channel setting is necessary. Refer to page 8.

For Better Sound (for DVD Features)

These 2 connections are optional for better sound.
1) For clear digital sound quality, use the DIGITAL AUDIO
OUT (either OPTICAL or COAXIAL) jack for the
connection to your digital audio system.
•If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
Dolby Digital decoder,
DTS decoder, or
MPEG decoder etc.
DIGITAL
AUDIO OUT
DVD / VCR OPTICALCOAXIAL
AUDIO
IN
L
S-VIDEO
IN
R
S-Video cable
(not supplied)
DVD
ANALOG S-VIDEO
AUDIO OUT OUT
VCR
AV2 (DECODER)
L
DVD/VCR AV1 (TV)
R
(Back of the unit)
5)
right under "Connecting
Digital Audio
Input jacks
OPTICAL COAXIAL
or
Optical Coaxial
cable cable
(not supplied) (not supplied)
7
Hints for connecting to a Dolby Digital
decoder, DTS decoder, or MPEG decoder
• By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality 5.1ch Dolby Digital
surround sound as heard in the movie theaters.
• When this unit is connected to a DTS decoder, you can
enjoy 5.1 channel surround system which reproduces the
original sound as truthfully as possible. 5.1 channel
surround system is developed by the Digital Theater
System, Inc.
• A digital component with a built-in MPEG 2, Dolby
Digital TM , or DTS decoder allows you to enjoy the
surround sound while producing the effecting of being in a
movie theater or a concert hall.
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder, and set "DOLBY DIGITAL" to
"ON" in the AUDIO menu. (Refer to page 22.)
• If output is DTS encoded audio, connect to a DTS
decoder, and set "DTS" to "ON" in the AUDIO menu.
(Refer to page 22.)
• If output is MPEG encoded audio, connect to a MPEG
decoder, and set "MPEG" to "ON" in the AUDIO menu.
(Refer to page 22.)
Hints for connecting to an MD deck or DAT
deck
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set "DOLBY
DIGITAL" to "OFF" in the AUDIO menu. Playing a
DVD using incorrect settings may generate noise
distortion, and damage the speakers. (Refer to page 22.)
• Set "DOLBY DIGITAL", "DTS", and "MPEG" to
"OFF" in the AUDIO menu for connecting to an MD
deck or DAT deck. (Refer to page 22.)
2) For dynamic sound effects, use the analog AUDIO OUT
jacks for the connection to your audio system.
AUDIO SYSTEM
ANALOG
AUDIO OUT
L
R
DVD/VCR
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
Audio
R L
Audio cables
(not supplied)
EN