Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
H97A6ED(EN).fm Page 9 Wednesday, March 24, 2004 9:44 AM
MENU
TIMER
SET UP
INITIAL
Setting the Clock
This unit incorporates a 24-hour clock. The clock must be set
for the Timer Recording function to operate correctly.
• Use the remote control for this procedure.
1) Press
VCR
, then
MENU
.
2) Press
or
to select "INITIAL", then press
K
L
3) Press
or
to select "CLOCK", then press
K
L
4) Press
or
until the relevant year appears, then press
K
L
5) Press
or
until the relevant month appears, then press
K
L
.
B
6) Press
or
until the relevant day appears, then press
K
L
7) Press
or
until the relevant hour appears, then press
K
L
8) Press
or
until the relevant minute appears.
K
L
9) Press
MENU
to start the clock.
Note:
• Press
to go one step back from the current step during
s
steps
5)
to
8)
.
• Although seconds are not displayed, they begin counting
from 00 when you exit by pressing
to synchronize the clock with the correct time.
• If this unit is unplugged or if there is a power failure for
more than 30 seconds, you may have to reset the clock.
MENU
TIMER
SET UP
INITIAL
Channel Presetting
Tuning of broadcast channels not already preset in the DVD/
INITIAL
VCR can be performed in two ways.
CH TUNING
CLOCK
Automatic Channel Preset
RF OUT
• By "AUTOMATICALLY" tuning channels and placing
LANGUAGE
them in sequential order in the DVD/VCR's memory i.e.
the first channel found will be memorized into the DVD/
VCR's channel position 1, the second channel found will
be memorized into the DVD/VCR's channel position 2
and so on.
• Execution of the "Automatic" channel presetting cancels all
the preset channels. DO NOT use this feature if you intend
to use some of the pre-tuned channels. Use the "Manual"
RF OUT CH 36
channel presetting function to tune in the additional
channels you require.
Manual Channel Preset
• Each channel is tuned manually and individually. Follow
the steps laid out in the "Manual Channel Preset".
Before you preset Channel...
• It is necessary to set the video channel if this unit is
connected to the TV via the coaxial cable, and TV channel
36 is set for broadcasting, or interference lines appear on
the picture. Please refer to "Video Channel Setting".
.
B
.
B
Automatic Channel Preset
.
B
You can programme the tuner to scan only the channels that
you can receive in your area.
.
B
• Use the remote control for this procedure.
.
B
1) Turn on the TV and select the TV channel to the video
channel on the TV.
2) Press
3) Press
4) Press
5) Press
• The tuner scans and memorizes all the active channels in
MENU
. Use this feature
your area. After scanning, the tuner stops on the lowest
memorized channel.
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CLOCK
YEAR
2 0 0 4
MONTH
0 1
DAY
0 7 WE
_ _
HOUR
_ _
MINUTE
To Select a Desired Channel
You can select a desired channel by using
directly pressing the
• Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press
and
brief delay.
• You can only select channels 1–99.
9
VCR
MENU
, then
.
or
to select "INITIAL", then press
K
L
or
to select "CH TUNING", then press
K
L
or
to select "AUTO", then press
K
L
MENU
TIMER
SET UP
INITIAL
scanning
number buttons
on the remote control.
6
6
. If you only press
, channel 6 will be selected after a
.
B
.
B
.
B
INITIAL
CH TUNING
CLOCK
RF OUT
LANGUAGE
CH TUNING
AUTO
MANUAL
MOVE
CH.
(
/
), or
K
L
0
EN
Werbung
Kapitel
Inhaltsverzeichnis
