Auto Return; Quick-Find; Index Search; Time Search - Clatronic vcr d 620 Bedienungsanleitung

H97A6ED(EN).fm Page 15 Wednesday, March 24, 2004 9:44 AM
• Press T-SET to activate VCR functions after your timer
recording is finished.
• DVD functions are available during Timer-standby mode
and Timer recording. You don't have to stop your timer
recording.

Auto Return

If there are any remaining programmes including Daily,
Everyday, & Weekly, AUTO RETURN will not operate.
1) Press VCR , then MENU .
2) Press or repeatedly to point to "SET UP", then press
K L
.
B
3) Press or to point to "AUTO RETURN", then press
K L
.
B
[ON] will appear next to "AUTO RETURN".
4) Press MENU .
Watch the Recorded Timer Programme
T-SET
Press to turn on the DVD/VCR, then press

Quick-Find

This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
1) Press VCR QUICK-FIND
, then
To Skip to the Beginning of Next Programme
1) Press QUICK-FIND
.
To View at Normal Speed
PLAY
1) Press . The Quick-Find is cancelled.
Note: •
This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
STOP
progress, press .
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the
beginning. After rewinding finishes, the DVD/VCR
will eject the tape.

Index Search

• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer recording and OTR.
• The index mark is not recorded if
released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
• Use the remote control for this procedure.
1) Press VCR SEARCH MODE
, then
2) Press
, repeatedly until the number of programmes
K L
that you want to skip appears.
3) Press
or .
s B
The DVD/VCR begins rewinding or fast forwarding to
the beginning of desired programme.
When the preset programme is reached, the DVD/VCR will
start playback automatically.
Note: • Index Search can be set up to 20.
•
This function will not operate in the Recording mode.
PLAY
.
.
PAUSE is pressed and
.
15
• Operations must be followed up within 30 seconds,
2) 3)
from steps to . Otherwise the Index Search mode
will be cancelled.
•
To exit the Index Search mode, press
Or press STOP after step

Time Search

If a tape includes both programmes recorded in the PAL
system and ones recorded in the NTSC system, this function
may not be operated correctly.
• Use the remote control for this procedure.
1) Press VCR , then SEARCH MODE
2) Press , repeatedly until the desired time appears.
K L
3) Press or .
s B
The DVD/VCR begins rewinding or fast forwarding to
the specified point.
When 0:00 is reached, the DVD/VCR will start playback
automatically.
Note: • Time Search can be set up to 9 hours 59 minutes
(9:59).
• This function will not operate in the Recording mode.
•
Operations must be followed up within 30 seconds,
from steps 2) to 3) . Otherwise the Time Search mode
will be cancelled.
•
To exit the Time Search mode, press
Or press STOP after step
MENU 2)
in step .
3) .
twice.
MENU 2)
in step .
3) .
EN