Technical Data - Fantini Cosmi Intellitherm C31 Bedienungsanleitung

UK
"JOLLY" FUNCTION
This function of Intellitherm C31 enables to cut out
temporarily the automatic program at any time (without
changing its setting), in order to have constantly the
required temperature (comfort, saving) for a period of
time ranging from 1 to 99 hours.
1 - Move S to A position (Automatic)
2 - Press key A to the left to set the comfort
temperature time that shall temporarily replace the
automatic program. Press the key to the right to
set the saving temperature time.
Each press of the key corresponds to one hour of
JOLLY operation. The display will show the SUN
or the MOON symbols according to the selected
temperature.
Intellitherm C31 DISPLAY
The symbol indicates antifreeze operation

TECHNICAL DATA

In compliance with EN 60730-1 and parts two
Wall mounting
Power supply: three alkaline 1.5V stylus batteries,
no connection to mains
Quick coupling on base
Contact rating: 5 (3)A 250V
Micro-disconnection (1BU)
Voltage free switching contact
Max room temperature T45
Scale range adjustable from 5 to 40°C
Differential: ± 0.25°C
Reference thermal gradient: 4 K/h
Double insulation
S
Once the time set has elapsed Intellitherm will
resume the automatic program. To shorten or
to cut out the "JOLLY" period before the set
time, reset the set times by means of key A, or
move the switch S to a position other than A
(Automatic)
Ambient temperature or programmed temperature
Current or programmed day of the week
Current or programmed time (hours and minutes)
FLAME: this symbol indicates that the chronothermostat is
requesting heat
SUN and MOON: these symbols indicate current comfort or
saving operation
Protection degree: IP20
Pollution degree 2
Impulse voltage 4000V
Battery life: two years, at least
Software class A
Antifreeze temperature preset at 5°C
Display flashing in case of low batteries
Battery replacement without loosing
memorised data
Control key protection cover
Dimensions: 120 x 65 x 29 mm.
ErP classification: ErP Class IV; 2% (EU Reg.
811/2013 - 813/2013)
8
A