SOLAC SP7170 Gebrauchsanleitung Seite 14

DIFFUSER ACCESSORY (G):
- This accessory is used to
harmonize the air flow into one
specific area.
- Attach the accessory to the
appliance. Press so that it is
secure.(Fig.2).
Cleaning
- Disconnect the appliance from
the mains and allow it to cool
before undertaking any cleaning
task.
- Clean the equipment with a
damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not let water or any other
liquid get into the air vents to
avoid damage to the inner parts
of the appliance.
- Never submerge the appliance
in water or any other liquid or
place it under running water.
CHANGING THE FILTERS:
(Fig.3):
- It is advisable to clean the
appliance regularly, as accumu-
lated hair or dust, especially in
the filter, reduces the product's
performance and increases the
risk of fire.
- To remove the filters:
- Open the cover that contains
the filter. (Fig.3).
- To reassemble the filter, proce-
ed with the above instructions,
in reverse order.
Anomalies and re-
pair
- Take the appliance to an autho-
rised technical support service
if product is damaged or other
problems arise. Do not attempt
to disassemble or repair the
appliance yourself as this may
be dangerous.
FOR EU PRODUCT VERSIONS
AND/OR IN CASE THAT IT IS
REQUESTED IN YOUR COU-
NTRY:
ECOLOGY AND RECYCLABILI-
TY OF THE PRODUCT
- The materials of which the
packaging of this appliance
consists are included in a
collection, classification and
recycling system. Should you
wish to dispose of them, use the
appropriate public recycling bins
for each type of material.
- The product does not contain
concentrations of substances
that could be considered har-
mful to the environment.