Out Of Range - LG TONE Platinum SE HBS-1120 Bedienungsanleitung

Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Slide and hold the Volume jog switch in the volume down (
Indicator lamp and battery level by voice.
Vibration Alert Settings

Out of Range

If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, press the MFB on the product to connect
to it manually.
Indicator Lamp
Battery Status
If the charging cable is removed while the Power switch is ON, the
power turns on and the product automatically connects to the
device whose connection settings have been completed.
Battery Status
Indicator Lamp
The vibration alert is automatically set to the ON position when you
turn on the power.
To activate or deactivate the vibration setting, slide and hold the
Volume jog switch in the volume up (
NOTE: If you turn off the vibration alerts, it will not vibrate even when
a call is being received or you are out of communication range.
14
Red Purple
Charging
) direction for one second to check the
Sufficient Normal
Blue flashes Purple flashes
) direction for two seconds.
Blue
80% Completed
Insufficient
Red flashes