Setting Up The Display Options - Samsung DVD-V6800S Anleitung

Dynamic Compression
• On: To select dynamic compression.
• Off: To select the standard range.
PCM Down Sampling
• On: Select this when the amplifier connected
to the player is not 96KHz compatible. In
this case, the 96KHz signals will be down
converted to 48KHZ.
• Off: Select this when the amplifier connected
to the player is 96KHz compatible. In
this case, all signals will be output with
out any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio
through the digital outputs.
• To make the Setup menu disappear, press the
MENU button.
• Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.

Setting Up the Display Options

1
Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
SETUP
Language Setup
Audio Setup
DVD
Display Setup
VCR
Parental Setup :
PROG
DivX(R) Registration
FUNC
OK Return
2
Press the œ or ƒ button to select Display
Setup, then press the OK or ‹¤button.
SETUP TV Aspect
Black Level
DVD
TV System
VCR
Video Output
PROG
FUNC
OK
32 - English
‹ ‹
‹ ‹
‹ ‹
‹ ‹
‹ ‹
Menu
: Wide
: Off
: PAL
: SCART-RGB
Return Menu
3
Press the œ or ƒ button to select TV Aspect,
press the OK or ‹¤button.
SETUP
TV Aspect
Black Level
DVD
✓ 16:9 Wide
TV System
VCR
Video Output
PROG
FUNC
OK Return
4
Press the œ or ƒ button to select the
required item, then press the OK button to
select the required option.
TV Aspect
Depending on the type of television you have,
you may want to adjust the screen setting
(Aspect Ratio).
• 4:3 Letter Box :
Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the
screen.
• 4:3 Pan &Scan :
Select this for conventional size TVs when
you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off).
• 16:9 Wide :
You can view the full 16:9 picture on your
widescreen TV.
Black Level
Adjusts the brightness of the screen (On/Off).
TV System
- NTSC : In case of using NTSC disc
• If your TV system only has PAL-Video input,
you must choose "PAL". When you choose
"PAL", Interlace output format is PAL 60 Hz
output.
• If your TV system only has NTSC, input you
must choose "NTSC ".
- PAL : In case of using PAL disc
• If your TV system only has NTSC-Video
input, you must choose "NTSC".
• If your TV system only has PAL input, you
must choose "PAL ".
: 4:3 L-Box
4:3 Letter Box
4:3 Pan &Scan : Off
: PAL 60
: SCART-RGB
Menu