Special Mounting Features, Required Tools; Technical Data, Operating Conditions - Lunos LUNOMAT Einbauanleitung

Special Mounting Features

The ventilation unit must always be fully accessible for operation and maintenance.

To avoid vibrations, a flat and hard ceiling or wall surface is required for ceiling and wall
mounting! Only mount on ceilings and walls with sufficient load-bearing capacity (min. 200 kg/
m³)!

If the unit is installed behind a suspended ceiling, an inspection opening must be provided in the
suspended ceiling for changing the filter and for opening the unit.

The unit should generally be installed by 2 persons!
Required Tools

Hexagon socket 4 (motors and mounting bracket (N))

Torx TX25 (housing cover)

Torx TX10 (blind cover and nozzle (B))

Spirit level, folding rule

Drill Ø 10 mm when installing in concrete or drywall

Sharp knife, saw
Technical Data
Unit voltage:
Control voltage:
Specific power consumption:
Maximum power consumption:
Airflow volume ranges:
Sound power level device:
Heat provision level according to DIBt: 84 %
Heat provision level according to PHI: 83 %
Filter class:
Protection class:
Weight:
Mains connection:
Control connection:
Operating Conditions
Room temperature:
Outdoor temperature:
Room humidity:
Outdoor humidity:
Temperature at installation site:
Air humidity at the installation site:
The installation site of the device should be protected from direct sunlight and weather.
If the device is operated, for example, under high humidity, heavy soiling, excessive stress, external
electronic influences, long downtimes or other difficult conditions, it must be approved for use, as the
standard version may not be suitable for reliable operation under such conditions.
20
230 V AC 50/60 Hz
1-10 V DC SELV
0.3 W/m³/h
52 W
50 - 80 m³/h
50 - 100 m³/h
50 - 125 m³/h
45 dB(A)
epm1 55 % ≈ F7 ≈ MERV13
IP22
24 kg
NYM 3 x 1.5 mm
J-Y(St)Y(2 x 2 x 0.8)
min. 16°C max. 40°C
min. -15°C max. 40°C
Exhaust air 65 % non-condensing
Not condensing in the unit or pipes
annual average more than 16°C, min. 12°C max. 40°C
less than 60 % rel. not condensing on the device