Airtec MS-18 Bedienungsanleitung Seite 8
Elektrisch betätigte pneumatikventile
Vorschau ausblenden
Andere Handbücher für MS-18:
- Bedienungsanleitung und konformitätserklärung (20 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
54-ATEX-01
for
(GB)
electrically operated
pneumatic valve
Conformity declaration in accordance with Directive 2014/34/EU
We AIRTEC Pneumatic GmbH, Westerbachstr. 7, D-61476 Kronberg
hereby declare that in the design delivered by us, the following products meet the
standards applied, in particular: Directive 2014/34/EU – equipment and protective sys-
tems for use in explosive atmospheres of zones 1 and 2 for gases, fumes and vapours,
as well as in zones 21 and zones 22 for dust.
Type: Pneumatic valve Series
MS-18, MS-98, M-04, ME-04, M-05, ME-05, MO-05, M-07, MO-07, ME-07, MG-07,
MN-06, MND-06, M-06, M-22, MO-22, ME-22, KN-05, KNE-05, KND-05, KN-55,
KM-09, KM-99, KM-10, KM-90, KME-10, MI-01, MI-02, MI-03, KNX-55, KNX-95, KMX-
09, KMX-90, KMX-10 (Option AIRNOX surface, AN, example MS-AN-18)
Valve markings:
Alternativ, DIN EN ISO 80079
*1)
only in combination with correctly assembled solenoid actuator. See table, page 7
*2)
with Viton seals
Harmonized standards applied, in particular:
DIN EN 1127-1
DIN EN 13463-1
DIN EN 13463-5
DIN EN ISO 80079-36
DIN EN ISO 80079-37
DIN EN ISO 4414
72770 Reutlingen, 02.01.2019 Factory Manager
The documents are on file at the notified body 0123 as document number EX9 12 06 58782 011.
Compiled:
Name:
J. Munz
Date:
14.08.2003
Subject to technical changes.
*1, 2)
2011
Explosion protection
Non-electrical devices ..., Part 1
2009
Non-electrical devices ..., Part 5
2011
Non-electrical devices ..., Part 36
2016
Non-electrical devices ..., Part 37
2016
2011
Pneumatics
i.V. Uwe Euchner
Manager of Research and Design
i.V. Frank Sulz
Tested / clearance
Name:
F. Sulz
Date:
02.01.2019
Altered:
Name:
Mz
Date:
02.01.2019
Rev.-No. 35
54-ATEX-01
Page: 8 of 20
Werbung
