Specifications - Sony BDX-N1000 Bedienungsanleitung

Specifications

General
Power requirements 100 to 240 V AC±10%, 50/60 Hz
Current consumption
0.5 to 0.3 A
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Humidity 20% to 90% (relative humidity)
Mass approx. 5.1 kg (11 lb 4 oz)
482 × 51.6 × 466 mm (w/h/d)
Dimensions
(19 × 2
including projecting parts
ATM
ATM traffic MPEG2 transport stream (CBR)
IP packet data (UBR)
ATM adaptation AAL5 (ITU-T I.363.5)
AAL1 incl. FEC (ITU-T I.363.1)
MPEG2 interface
Standards Conform to ISO/IEC IS13818-1,
ITU-T H.222.0
Bit stream inputs
System DVB ASI
Standards DVB-PI-232 Revised,
TM 1449 Rev. 2
Connector MPEG BIT STREAM INPUT:
BNC (1), 75 ohms,
Transmission mode Data packet and data burst modes
Bit stream outputs
System DVB ASI
Standards DVB-PI-232 Revised,
TM 1449 Rev. 2
Connector MPEG BIT STREAM
OUTPUT1/2: BNC (2), 75 ohms
Transmission mode Data packet mode
× 18
1 3
/ / inches)
8 8
System control
RS-232C
Standards RS-232C standards
Connector D-sub 9-pin, female (1)
10BASE-T
Standards Ethernet IEEE 802.3
Connector RJ-45 modular jack (1)
Alarm output
System Relay contact
Connector D-sub 9-pin, female (1)
Nominal contact voltage/current
DC 30 V, 1 A
Supplied accessories
Rack mount screws (+B × 8) (8)
Operation manual (1)
Installation manual (1)
Associated products
BDX-E1000 MPEG encoder unit
BDX-D1000 MPEG decoder unit
BDX-M1000 MPEG multiplexer unit
Design and specifications are subject to change
without notice.
9 (E)