Locations And Functions Of Parts - Sony BDX-N1000 Bedienungsanleitung

Locations and Functions of Parts

Front panel
1 POWER indicator
Rear panel
MPEG BIT STREAM I/O
DVB ASI
INPUT
1 POWER indicator
Lights in green when the power is on.
When trouble occurs, the indicator warns of it as
follows:
Indicator Trouble
Unlit • External power is shut down.
• Internal 5 V power is shut down.
Flashes in red • An error is detected in self-diagnostics.
• Abnormal fan operation
• Either internal 3.3 V power circuits is
short-circuited.
If the indicator does not light even when you set the
POWER switch to " " or it flashes in red, return the
switch to " ," unplug the AC power cord, and contact
your Sony service personnel.
2 POWER switch
POWER
I
O
7 MPEG BIT STREAM I/O connectors
8 ATM I/O block
ALARM
DVB ASI
1 2
OUTPUT
> PC <
3 Display
4 Tx indicator
NETWORK INTERFACE UNIT BDX-N1000
9 ALARM connector
q; CONTROL connectors
CONTROL
10BASE-T RS-232C
Cooling fan
2 POWER switch
To turn the power to the unit on/off.
The power is on when the switch is set to " " and off
when set to " ."
3 Display
When MPEG bitstream input (DVB ASI) is being
supplied, the display alternately indicates the ATM-
cell bit rate (in kbps) at the input and output ports.
Note that the displayed value is not a precise bit rate.
The display is just for reference.
5 Rx indicator
6 ALARM indicator
Tx Rx ALARM
-AC IN
U
qs AC IN connector
qa U terminal
5 (E)