INTERSPIRO SPIROLINE MP Benutzerhandbuch Seite 6

AIR SUPPLY HOSE
The Spiroline MP system can be used with an air supply hose up to 60 meters in
length.
The working pressure is 7.5 bar.
Versions with Interspiro connection have a locking ring to lock the connection to the
manifold of the bail-out set/breathing apparatus or Spiroline belt.
SPIROLINE BELT
The Spiroline belt consists of a coupling with four connections mounted on a belt
with a waist buckle. The hose to the facemask is connected as shown below. One
connection is used as a compressed air input and is connected to the air supply hose.
In this connection there is a non-return valve to prevent toxic gases from getting in if
the air supply hose is disconnected. The two other connections are fitted with blank
plugs or an optional medium pressure gauge and an optional suit ventilation hose;
see figure below.
Hose to facemask
Coupling with four
connections
6
Belt
Connection to TRS unit (male)
Connection (female)
to user interface
Waist buckle
Blank plug or pressure gauge
Compressed
air input
Blank plug or hose
for suit ventilation