B-510Ld1 / B-510Ld2 - Optika Italy B-510 Series Bedienungsanleitung

8. Insert the lamp housing cable into the fluorescent
power supply, aligning the notches on the
connectors. (Fig. 22)
9. Insert the power cord into the socket ①. (Fig. 23)
Before connecting the power cord, se-
cure the lamp housing cable the the
power supply.
If the power cord is connected before,
there may be a risk of electrical shock.

7.7.4 B-510LD1 / B-510LD2

1. Insert the round dovetail socket of the illuminator
① into the hole in the microscope body and
tighten the locking screw ②. (Fig 24).
2. Connect the LED illuminator plug into the
microscope body ③. (Fig. 25)
①
③
Page 25
Fig. 22
Fig. 23
①
②
Fig. 24
Fig. 25