Care And Cleaning - Kenwood kMix BLX50 series Bedienungsanleitung

to use your blender
1 Fit the sealing ring
ensuring the seal is located correctly.
Leaking will occur if the seal is damaged
G
or incorrectly fitted.
2 Clip the blade unit
3 Screw the goblet onto the blade assembly in a
clockwise direction - ensuring that the blade
assembly is fully tightened.
4 Put your ingredients into the goblet.
5 Clip the lid seal onto the underside of the lid.
6 Fit the filler cap to the lid.
7 Fit the lid by pushing down until secure.
8 Place the blender onto the power unit.
The appliance won't work if the blender is
G
incorrectly fitted.
9 Plug in and the "ready to use" light
to indicate that the blender is interlocked correctly
and ready to use. If the "ready to use" light is off
the blender is either not fitted or not interlocked
correctly to the power unit.
10 Select a speed (refer to the function selector chart).
hints
To blend dry ingredients - cut into pieces, remove
G
the filler cap, then with the machine running, drop
the pieces down one by one. Keep your hand over
the opening. For best results empty regularly.
The processing of spices is not recommended as
G
they may damage the plastic parts.
When making mayonnaise, put all the ingredients,
G
except the oil, into the blender. Remove the filler
cap. Then, with the appliance running, add the oil
slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need
G
scraping down. If the mixture is difficult to process,
add more liquid.
into the blade unit -
into the base .
will come on

care and cleaning

Always switch off, unplug and dismantle before
G
cleaning.
Empty the goblet before unscrewing it from the
G
blade unit.
The goblet can be washed in your dishwasher.
G
power unit
Wipe with a damp cloth, then dry.
G
Don't immerse the power unit in water.
G
Wrap excess cord around the bottom of the power
G
unit .
blade assembly
1 Unscrew the base from the goblet in an
anticlockwise direction.
2 Remove the blade unit from out of the base by
pushing up from underneath.
Care should be taken when removing the
G
blade unit from the base.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades – brush them clean
using hot soapy water, then rinse thoroughly under
the tap. Don't immerse the blade unit in
water.
5 Leave to dry upside down.
lid
Remove the lid by pushing the tab up
G
Unclip the seal before cleaning the lid
G
Wash both parts by hand, then dry.
G
other parts
Wash by hand, then dry.
3
.
.