Care And Cleaning; Service And Customer Care - Kenwood triblade HB724 Bedienungsanleitung

important
Never use the masher in a saucepan
G
over direct heat. Always remove the
saucepan from the heat and allow to
cool slightly.
Do not tap the masher on the side of
G
the cooking vessel during or after
mashing. Use a spatula to scrape
excess food away.
For best results when mashing never
G
fill a saucepan etc., more than half
full with food.

care and cleaning

Always switch off and unplug before
G
cleaning.
Don't touch the sharp blades.
G
Take special care when preparing
G
food for babies, the elderly and
infirm. Always ensure that the hand
blender shaft is thoroughly sterilised.
Use a sterilising solution in
accordance with the sterilising
solution manufacturer's instructions.
Some foods, eg carrot, may
G
discolour the plastic. Rubbing with a
cloth dipped in vegetable oil may
help to remove discolouration.
power handle, whisk collar,
masher collar and chopper
cover
Wipe with a slightly damp cloth, then
G
dry.
Never immerse in water or use
G
abrasives.
Do not dishwash.
G
blender shaft
either
Part fill the beaker or a similar
G
container with warm soapy water.
Plug into the power supply, then
insert the blender shaft and switch
on.
Unplug, then dry
G
or
Wash the blades under running
G
water, then dry thoroughly
whisk, beaker, chopper bowl,
chopper blade, masher foot,
masher paddle, beaker and
bowl base/lids
Wash up, then dry.
G
The following parts can be washed
G
in a dishwasher: blender shaft, pan
blender, whisk (not whisk collar),
masher foot (not masher collar)
masher paddle, chopper bowl, (not
chopper cover), chopper blade,
beaker, beaker and bowl base/lids.
hint on cleaning the masher
foot
If food has been allowed to dry onto
G
the masher attachment, remove the
paddle. Soak the paddle and
masher foot in warm water to soften
and then wash thoroughly.
important - don't allow the masher
collar to get wet.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your appliance or
G
servicing or repairs
G
Contact the shop where you bought
your appliance.
Designed and engineered by
G
Kenwood in the UK.
Made in China.
G
5