Care And Cleaning - Kenwood HDX75 kMix Bedienungsanleitungen

3 Fit either the coarse or fine
screen to the masher shaft – turn
clockwise to lock
4 Turn the masher upside down and
fit the paddle over the central hub
and turn anti-clockwise to secure
. (If the collar is not fitted
7
then the paddle will not
secure in place).
5 Fit the power handle to the masher
assembly - turn clockwise to lock.
6 Plug in.
7 Place the masher in the saucepan
or bowl etc.
Select a low speed on the variable
control and then press the ON
button (refer to recommended
usage chart).
Move the masher in an up and
l
down movement throughout
the mix until the desired result is
achieved. Increase the speed if
required.
8 After use release the ON button
and unplug.
care and cleaning guide
Item
Power handle
Blender shaft
❋
soup XL
❋
Blade covers
Chopper cover
Chopper bowl
Chopper blade
Chopper bowl lid
Chopper bowl
rubber ring base
Masher shaft
Masher paddle
Masher collar
Masher
Storage unit
❋ If water gets inside the shaft, drain and allow to dry before
use.
.
6
Suitable
for
dishwashing
8
8
8
8
8
4
4
4
4
8
4
8
4
4
9 Turn the power handle
anticlockwise and remove the
masher assembly.
10 Remove the paddle from the
masher by turning clockwise.
11 Remove the screen by turning anti-
clockwise
8
12 Unscrew the collar from the masher
shaft.
optional attachment (not
supplied in pack)
Mini chopper - refer to "service and
customer care" section to order.

care and cleaning

Always switch off and unplug
l
before cleaning.
Do not touch the sharp blades.
l
Some foods, eg carrot, may
l
discolour the plastic. Rubbing with
a cloth dipped in vegetable oil may
help to remove discolouration.
Do not use abrasives.
l
Do Not Handwash Wipe with
immerse in
Water
4
4
4
8
4
8
8
8
8
4
8
4
8
8
6
and then lift off.
a damp
cloth
8 4
8 4
8 4
4 4
8 4
4 4
4 4
4 4
4 4
8 4
4 4
8 4
4 4
4 4