Get Started; Install The Batteries; Recharge The Batteries; Recharge The Batteries Through The Usb Cable - Philips Digital Pocket Memo LFH 9500 Benutzerhandbuch

2

Get started

2.1

Install the batteries

The Digital Pocket Memo can be operated with
the two rechargeable AAA batteries delivered
with the product. Standard (non-rechargeable)
AAA alkaline batteries may also be used.
The on/off switch of the Digital Pocket
1
Memo must be in the
Open the battery compartment on the back
2
side of the Digital Pocket Memo by sliding it
outwards then folding it up.
Insert the two AAA batteries. The correct
3
polarity is indicated on the inside of the
battery compartment cover.
Close the battery compartment by folding it
4
down and sliding the battery compartment
cover inward until it clicks.
1
D Note
Do not mix battery types! Use two rechargeable
batteries or two non-rechargeable alkaline
batteries.
User manual
position.
OFF
1 2
2
2.2

Recharge the batteries

The Digital Pocket Memo can be operated
with the rechargeable Philips AAA batteries. To
recharge these batteries, use the
the USB cable or the optional
supply.
2.2.1 Recharge the batteries through the
USB cable
When the Digital Pocket Memo is connected to
a PC or notebook computer with the supplied
USB cable, the rechargeable batteries are
automatically recharged. If the USB port on the
computer is high powered, a complete recharge
cycle takes about 2.5 hours.
D Note
The PC must be ON when charging battery via
the USB cable connection. The Digital Pocket
Memo may become warm during fast recharging.
Important
C
If the USB port of the computer does not
supply enough power capacity (500 mA), disable
the USB quick charge function in the menu of the
Digital Pocket Memo and recharge the batteries
using the optional power supply.
2.2.2 Recharge the batteries through the
docking station
Make sure that the docking station is
1
connected to PC with the USB cable and
that the PC is on.
Docking Station,
Philips power
7