Set The Date And Time; Power-Save Mode - Philips Digital Pocket Memo LFH 9500 Benutzerhandbuch

2.5.2

Set the date and time

After selecting the user interface language, the
Digital Pocket Memo will prompt you to set the
current date and time.
Press the + or – button
1
value for the year, month or day.
→
Press the smart button
2
arrow (↑) to the next entry.
After setting the day, press the
3
button to advance the settings to the
2
correct time.
Press the + or – button
4
12-hour or 24-hour clock, AM or PM (if a
12-hour clock is selected), and to change
the value of the hour and minute settings.
→
Press the smart button
5
date and time. The Digital Pocket Memo is
now ready to function.
D Note
If a mistake is made in setting the date/time,
←
use the smart button
procedure to step back to make corrections.
It is also possible to change the date and time
later using the menu. See
21 for more information.
10
to change the
1
to advance the
2
→
smart
to select a
1
to confirm the
2
3
2
1
any time during the
3
Menu settings on page
2.6

Power-save mode

After four minutes of inactivity, the Digital
Pocket Memo automatically goes into power-
save mode and the LCD screen will display the
date and time. Press any button to reactivate it.
If the Digital Pocket Memo is not used for more
than two hours, it turns off completely. Turn the
unit on by moving the On/Off switch to the
position and then back to the
OFF
ON position.
User manual