How To Use The Mode Selection Button; Cooling Operation - LG PQRCFCS0 Bedienungsanleitung

How to use the Mode Selection Button

Cooling Operation

PQRCFCS0
Defrost Preheat Out door
ROOM FAN
TEMP SPEED
What is the three-minute delay function?
The function to protect the compressor delays the output of cool air when operating instantly
after interrupting the cooling operation.
Cooling operation restarts after 3 minutes when the compressor starts to operate.
You can choose the expected temperature from 18°C to 30°C.
It is recommended that the ideal difference of the temperature between indoors and outdoors
should be less than 5°C.
How to use the Mode Selection Button
1
Cooling operation will begin if you press the On/Off
button.
2
Press the temperature button and set the expected
temperature lower than the current room temperature.
(18~30°C)
A click of the button will increase the expected temperature by 1°C.
A click of the button will decrease the expected temperature by 1°C.
* If the expected temperature is set higher than the current
room temperature, the cooling function will not begin and
just the blowing operation will continue.
3
If you want to change mode during the operation, the
operation mode will be changed in the order of cooling,
heating, automation, dry(dehumidification), fan by only
central controller.
4
If you press the On/Off button, the cooling operation will
stop.
Owner's & Installation Manual 11