Sony PMW-300K1 Informationen Zu Zusätzlichen Funktionen Seite 17

To name the stored file
Name the stored file before proceeding to step 3.
For details, see "Naming the stored file."
3
For the setup files, select "Store(SxS)" or "Store(USB)" in "Camera Data."
Select "Store(SxS)" or "Store(USB)" in "User Data" for the User file.
Select "Store(SxS)" or "Store(USB)" in "PP Data" for the picture profile.
The list box of the files appears.
"No File" is displayed on the file number for which no files are stored.
Date, time, and file name are displayed on the file number for which a file is stored.
4
Select the file number to be stored the file, then press the SEL/SET button or the jog dial.
A waiting message is displayed.
Note
If a setup file already exists on the memory card you stored in step 3, a message to confirm whether
to overwrite the file is displayed.
5
To execute storing, select "Execute," then press the SEL/SET button or the jog dial.
To cancel storing, select "Cancel," then press the SEL/SET button or the jog dial.
When executing storing, an in-progress message is displayed while writing. When writing is
completed, a completion message is displayed.
Note
If the writable media is not inserted or there is not sufficient space on the media, an error message is
displayed.
Naming the stored file
It is useful for identifying a file to name the stored file before storing the setting data as the file.
The following characters can be used for naming.
Numbers, alphabets, special characters (! # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ~)
Note
Characters that can be used for naming the picture profile are numbers, alphabets, - (hyphen), _
(underscore), and space.
1
Select "File ID" in "Camera Data" of the OTHERS menu.
Select "File ID" in "User Data" of the OTHERS menu for the User file.
Select "Profile Name" of the PICTURE PROFILE menu for the picture profile.
2
Select the character by using the jog dial or the up/down buttons, then press the SEL/SET
button or the jog dial.
3
Repeat step 2.
4
After finishing character input, move the cursor to SEL by using the SEL/SET button or
the jog dial, then press the SEL/SET button or the jog dial.
The input name is displayed. When performing the storing operation for the setup file, the data is
stored with the input name.
17