Preamplifier Output; Installation Notes; Scope Of Delivery - Bosch CAD 12 Bedienungs- Und Einbauanleitung

External audio sources | Preamplifier output | Installation
f Turn the volume control B to the left or
right in order to set the level to between -9
and +9.
In order to leave the menu,
f press the MENU G button, repeatedly if
necessary.

Preamplifier output

You can connect an additional amplifier to the
device. To do this, the amplifier must be
connected to the rear of the device.
Robert Bosch Car Multimedia GmbH
Installation

Installation notes

Note the following when selecting a place for
installation:
No wires or pipes must be located
f
beneath the surface on which the device
is to be installed.
Do not install the device in places
subjected to direct sunlight,
f
f near hot air outlets (heating etc.),
subjected to rain or moisture,
f
subjected to dust or dirt,
f
subjected to strong vibrations.
f

Scope of delivery

User manual
f
Mounting frame
f
Guide pin
f
Accessories for chambers A and B
f
(8 649 494 026)
Connection cable for chamber C1
f
(8 649 492 033)
Connection cable for chamber C3
f
(8 649 492 022)
USB connection cable
f
(8 649 494 018)
f Mic connection cable
(8 675 501 012)
IR remote control (including two 1.5 V
f
batteries)
Removal tools
f
7 620 210 015/020-022 | 06.2015
en | 63