Treble Reduction Feature During Interference (Hcut); Setting Button Functions (Key Prg) - Bosch CAD 12 Bedienungs- Und Einbauanleitung

Radio operation
(see the section on "Setting button
functions" in this chapter).
f Press the or H button to start seek
tuning.
If a station with the currently selected program
type is found, it is tuned into. If no station is
found offering this program type, the station
that was being received most recently is
restored.
Treble reduction feature during
interference (HCUT)
The HCUT function results in improved
playback in case of weak radio reception. If
reception interferences are present, the
interference level is automatically reduced.
f If necessary, first switch to radio opera-
tion.
f Press the MENU G button to open the
menu.
f Press the MENU G button repeatedly
until "HCUT" appears on the display, along
with the current setting of "OFF", 1 or 2
(strength of the interference level cut).
f Turn the volume control B to the left or
right in order to adjust "HCUT" or to turn it
off.
f Press the MENU G button, repeatedly if
necessary, to close the menu.

Setting button functions (KEY PRG)

You can set the short press function of the
and H buttons in radio operation. The
following settings are available:
AUTOSEEK: Automatically search for the
f
next receivable station.
Robert Bosch Car Multimedia GmbH
MANSEEK: Manually alter the frequency in
f
steps.
PRSTSCAN: Sample the stations stored in
f
the current memory bank.
BANDSCAN: Sample receivable stations in
f
the current waveband.
f If necessary, first switch to radio opera-
tion.
f Press the MENU G button to open the
menu.
f Press the MENU G button repeatedly
until "KEY PRG" appears in the display.
f Turn the volume control B to the left or
right in order to change between the
settings.
f Press the MENU G button, repeatedly if
necessary, to close the menu.
7 620 210 015/020-022 | 06.2015
en | 51