Error Code Displayed, Battery Version - VLX 416S Bedienungsanleitung

At the end of charging
with the electronic battery
charger, the battery does
not provide the correct
voltage (about 2.14 V
per element without load)
and only one or a few el-
ements are found to be
discharged when tested
with a hydrometer (battery
model only)
The electrolyte in the bat-
tery is turbid (battery mod-
els only)

Error code displayed, battery version

one or more elements are damaged
The battery has reached the end of the charg-
ing/discharging cycles declared by the manu-
facturer
the battery has been recharged with too high
a current
the battery has been charged when beyond
the minimum discharge limit suggested by the
Manufacturer
.
replace the damaged elements if possible.
For 6 or 12 V single block batteries, replace the
entire battery
replace the battery
replace the battery
replace the battery
.
GB
Brush short circuit error.
Overcurrent error
Suction short circuit error
Overcurrent error
Electronic board temperature error
Brush thermal protector error
Machine on with battery charger
powered error
Excess battery voltage error
27