Preparing The Machine For Work; Working; At The End Of Work - VLX 416S Bedienungsanleitung

Follow the safety regulations on use of detergents given in the section "Safety regulations".

Preparing the machine for work

Before starting work, wear overalls, ear protectors, non-slip waterproof shoes, mask to protect the res-
piratory tract, gloves and all other personal protection devices recommended by the supplier of the deter-
Proceed as follows before starting work.
water and low-foam detergent. Leave at least 5 cm between the surface of the liquid and the opening of
front and rear blades are not worn.
adjust the working height of the squeegees.

Working

After setting up the machine, proceed as follows:
cable model
seconds, the brush and suction motor shut down to prevent draining the batteries excessively. Charge
the batteries.

At the end of work:

WARNING
gent used or necessitated by the work environment.
IMPORTANT!
WARNING
follow a few simple rules:
GB
-
After a few
-
20