Movement Installation; Lifting And Transporting The Packaged Machine; Delivery Checks; Unpacking - VLX 416S Bedienungsanleitung

remove the fuse from the battery bridge. In cable models, the operator must always be in a position to verify that
the plug remains unplugged from the mains power socket throughout the maintenance operations.
All work on the electrical system and all maintenance and repair operations other than those explic-
itly described in this manual must be performed by specialist and experienced personnel only.
If the power cable, plug or terminals require replacing, make sure the electrical connections and cable grip are
tightly fastened to guarantee the resistance of the cable if pulled.
Only use original accessories and spare parts supplied by the Manufacturer to guarantee safe and problem-free
operation of the machine. Never use parts removed from other machines or from other kits.
The machine is designed and constructed to provide ten years' service from the date of manufacture shown on
the nameplate. After this period, whether the machine has been used or not, it should be disposed of according to
current legislation in the country in which it is used.
ronmental protection regulations (2002/96/EC WEEE). It must be disposed of separately from ordinary waste in
compliance with current legislation and standards.
Special waste. Do not dispose of with ordinary waste.
Alternatively, return the machine to the Manufacturer for a complete overhaul.
If you decide to stop using the machine, remove the batteries and dispose of them through an authorised recycling
centre.
Also make sure that all parts of the machine that could represent a hazard, particularly to children, are made safe.

Lifting and transporting the packaged machine

Always load/unload lorries in adequately illuminated areas.
The machine is packaged on a wooden pallet by the Manufacturer. It must be loaded on to the transporting vehicle
using suitable equipment (see EC Directive 89/392 and subsequent amendments and/or additions). At destina-
tion, it must be unloaded using similar means.
A fork lift truck must always be used to lift the packaged body of the machine. Handle with care to avoid knocking
or overturning the machine.

Delivery checks

When the carrier delivers the machine, make sure the packaging and machine are both whole and undamaged. If
the machine is damaged, make sure the carrier is aware of the damage and before accepting the goods, reserve
the right (in writing) to request compensation for the damage.

Unpacking

When unpacking the machine, the operator must be provided with the necessary personal protection
Proceed as follows to unpack the machine.
during lifting.

MOVEMENT INSTALLATION

WARNING
being accidentally dropped.
WARNING
devices (gloves, goggles, etc.) to limit the risk of injury.
GB
-
16