Batteries: Removal; Lifting And Transporting The Machine; Practical Guide For The Operator - VLX 416S Bedienungsanleitung

Mount the batteries on the machine using lifting means suitable for their weight.

Batteries: removal

When removing the batteries, the operator must be equipped with suitable personal protection devices
(gloves, goggles, overalls, safety shoes, etc) to reduce the risk of accidents. Make sure the switches on
do not short circuit the battery poles, do not cause sparks and do not smoke. Proceed as follows:

Lifting and transporting the machine

All phases of lifting and moving must be performed in an adequately illuminated en-
vironment with the adoption of the safety measures most appropriate to the situation.
The operator must always use personal protection devices.
To load the machine onto a means of transport, proceed as follows:

PRACTICAL GUIDE FOR THE OPERATOR

connected to the mains.
the level of battery charge. There may be:
functions.
brush does not start rotating until the brush lever is operated. ECO function (battery models only), used
to reduce brush motor power by 20%, to activate this function, operate the "Brush lever" then press the
When the brush button is pressed, suction and detergent delivery are also enabled automatically.
WARNING
DANGER
WARNING
WARNING
i INFORMATION
GB 18