Lightmaxx VEGA SILENT PAR SERIE Bedienungsanleitung Seite 12

Important safety instructions! Please read before connection!
DANGER! (Electric shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the de-
vice. Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, pro-
tective devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is dama-
ged, it must be replaced immediately with an original spare part from the manufac-
turer. Failure to do so may result in fire or death due to electric shock!
Notice! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor operation
(IP20). Never expose the device to rain, moisture or liquids as this may cause dama-
ge.
Vibrations, dust or sunlight can also cause damage, avoid them!
Warning! (High light intensity - eye injuries)
A direct view into the light source is absolutely to be omitted!
Warning! (Epilepsy)
Stroboscopic effects (flashes of lightning) can trigger seizures of epilepsy in some
people. Sensitive people are to be warned and should avoid looking at the corre-
sponding effects.
Notice! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat
sources, naked flames, combustible materials, and liquids. A minimum distance of 1
m is required.
Do not tape or cover the ventilation slots of the unit.
Notice! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient temperatu-
re before commissioning.