5. Data Port Commands
5.4 Commands for operating the EFOY Unit
Command
BATTERYPROTECTION
[ON/ OFF]
BUTTON
[ON/ OFF / AUTO]
Output in the terminal program
Allows you to deactivate/activate the battery protection mode.
SFC>BATTERYPROTECTION OFF
OFF
SFC>BATTERYPROTECTION ON
ON
This allows you to reproduce the functions governed by buttons on the
remote control. You must always indicate a parameter corresponding
to the button to be "pushed".
Button
auto
On
Off
Example:
SFC>BUTTON AUTO
OK
SFC>BUTTON
no valid parameter
SFC>BUTTON ON
OK
SFC>
In this example, the EFOY unit began in the automatic mode. No
parameter was indicated with the second command. The response was
therefore an error message. The third command switches the EFOY
unit on.
27
Parameter
AUTO
ON
OFF