Data Port Commands; Commands - EFOY Pro 800 Bedienungsanleitung

5. Data Port Commands

5. Data Port Commands

5.1 Commands

Commands for selecting operating parameters
Command
?
ERROR
GET
LIMITS
SFC
STDVALUE
You can view the operating status, modify operating parameters or set up
external control via the terminal interface.
There are various commands in the terminal interface. They are divided
into three categories:
commands for selecting operating parameters
(see Chapter 5.2, page 18)
commands for modifying preset operating parameters
(see Chapter 5.3, page 24)
commands for operating the EFOY unit
(see Chapter 5.4, page 27)
The various chapters describe the function of all commands. The following
is intended to provide a synopsis of the commands.
All mentioned examples in this user manual are based on the output of
EFOY Pro Series 800 / 800 Duo / 2400 / 2400 Duo.
The output of the EFOY Pro 600 / 1600 / 2200 / 2200 XT differ in order.
Deviations of the commands in the different series are marked in this
user manual.
Enter commands only in upper case, i.e. SFC, and make sure that you
have spelled them correctly.
Brief description
Displays all available commands.
Displays the most recent errors
Displays the feasible values for operating parameters
Displays the permissible range for every operating parameter. 5.2
Displays the current operating status.
Displays the default settings for operating parameters set by
the command DEFAULT.
16
Chapter
5.2
5.2
5.2
5.2
5.2