SUHNER LSC 20 Originalbetriebsanleitung Seite 4

Technical Data
at 90 PSI Operating Pressure
Power
Torque
Air consumption
full load
Air consumption
no load
No load speed
Sound level according to EN ISO 15 744
Sound pressure level
Sound power level
Vibration according to
EN ISO 8662-4
with test disc dia 50 x 6
LWC 20/LWC 10
with test disc dia 25 x 10
LSC 20
weight without hose
Recommended air quality
according to DIN ISO 8573-1
Air hose connection
Collets
(refer to APT catalog)
Machine components
1 Right angle head
2 Lever throttle
3 Spindle
4 Wrench 14 mm
LWC 20
LWC 10
LSC 20
350 W
LWC 20 0,7 N m
LWC 10 1,05 N m
LSC 20 0,6 N m
18,2 cfm
0,52 m
20,3 cfm
0,58 m
LWC 20 20'000 rpm
LWC 10 10'000 rpm
LSC 20 20'000 rpm
LWC 20 88 dB(A)
LWC 10 88 dB(A)
LSC 20 85 dB(A)
LWC 20 101 dB(A)
LWC 10 101 dB(A)
< 2,5 m/s
< 2,5 m/s
LWC 0,9 kg
LCS 0,75 kg
3/4/4
G 3/8"-NPT 1/4"
up to 5/16"
5 Clamping nut
6 Wrench 18 mm
7 Collet
8 Hose connection
Adaptor Kit for Grinding wheels
3
/min
9 Guard
10 Clamping bolt
3
/min
Recommended Accessories
11 Coupling with min ID 5.5 mm/ 7/32"
for hose ID 8 mm/5/16"
12 1/2" -Service Unit ( Capacity 5-8
Micron).
Suitable Tools:
General:If possible always mount shank in
collet until it bottoms out.
LSC 20/LWC 20
2
13 Burs, specialty abrasives,
2
materials conditioning products
14 Mounted points, Attention: always
observe mounting instructions.
LWC 10
15 Backing pads up to 110 mm /4 " with
RFD 16 and Flange nut 17 or
Velcro Pads & discs
18 Wire cup brushes etc.
Additional Abrasives and Tools
can be found in the the SUHNER catalogs
Air supply requirements:
The DIN ISO quality specifications require, that
air is free of solid particles larger than 5
micron, remaining water content to be max. 6
3
g/m (pressure dew point +3 degree C) and
air may contain 5 mg/m
please observe the following:
• Operating with dirty and unlubricated air
reduces tool life substantially.
GB
3
of oil. Therefore