Inhaltsverzeichnis
Werbung
CD PLAYER
Selecting a different track
• By pressing repeatedly SKIP/SEARCH T you
REPEAT 1
1
can skip to the beginning of next tracks and by
DISC
2
pressing repeatedly S SKIP/SEARCH you can
3
REPEAT 1
1
skip to the beginning of preceding tracks.
DISC
DISC
2
• If you press S SKIP/SEARCH only once, you
3
REPEAT 1
1
skip to the beginning of the current track.
DISC
ALL DISC
2
3
1
DISC
2
Fast search
3
Fast search can be activated during playback or in
PROGRAM
the pause mode.
1
REPEAT 1
DISC
• By keeping SKIP/SEARCH S or T pressed,
2
3
PROGRAM
you activate the fast search in the corresponding
1
REPEAT 1
DISC
DISC
2
direction.
PROGRAM
3
REPEAT 1
– During the fast search procedure you can listen
1
DISC
ALL DISC
2
to the tracks at a reduced volume.
PROGRAM
3
1
• Normal playback will continue as soon as you
DISC
2
release S or T.
3
B
Changing display indication
1
DISC
2
• Press TIME on the remote control whenever you
3
want to know the remaining playing time of the
track being played.
B
• Press TIME again if you wish to know the
1
DISC
FLAT ROCK POPS JAZZ
2
remaining playing time of the entire CD (or CD
3
programme).
B
• Press TIME again if you wish to return to the
1
DISC
FLAT ROCK POPS JAZZ
elapsed playing time indication of the current
2
3
track
B
1
DISC
2
3
CD PROGRAMMING
By programming the player you can play up to 32
tracks in any desired order.
Storing a programme
• Insert CD(s) (see LOADING CD's).
• Press the CD PROGRAM button
PROGRAM
1
– The PROGRAM indicator will light up,
DISC
FLAT ROCK POPS JAZZ
2
'O ----' will appear in the display.
3
• Press the desired DISC SELECT button. The
PROGRAM
number of the selected disc starts blinking and
1
'0P- 1' will be displayed.
DISC
FLAT ROCK POPS JAZZ
2
3
• Press SKIP/SEARCH S or T to select the
first desired track.
– The number next to the 'P' will count up or down
indicating the first programmed track.
PROGRAM
For example, if track 3 is selected, '3P- 1' will
1
DISC
FLAT ROCK POPS JAZZ
2
be displayed.
3
• After the track is selected, press the
CD PROGRAM button again.
– The display will stop blinking indicating that you
can now programme the next track.
• Repeat above mentioned steps to program
additional tracks.
– Up to 32 tracks can be programmed. If you try
to program more than 32 tracks, 'FULL' will
appear on the display.
Reviewing the program
• After programming you can press CHECK on the
remote control repeatedly to review the
programmed tracks.
Repeat function
If you want to listen to CDs or a CD programme
PRESET EQ
more than once without having to start playback
FLAT ROCK POPS JAZZ
again, you can do so with the REPEAT function.
PRESET EQ
FLAT ROCK POPS JAZZ
• Press REPEAT on the remote control.
– You can change the repeat status from 'REPEAT
PRESET EQ
FLAT ROCK POPS JAZZ
1' to 'REPEAT 1 DISC' to 'REPEAT ALL DISC' to
'REPEAT off'.
PRESET EQ
FLAT ROCK POPS JAZZ
– REPEAT 1: A specific title is played over and
over again.
– REPEAT 1 DISC: The current CD is repeated from
the beginning till the end of the CD´s last title.
PRESET EQ
FLAT ROCK POPS JAZZ
– REPEAT ALL DISC: All CD's are repeated from
the beginning till the end.
PRESET EQ
FLAT ROCK POPS JAZZ
– REPEAT PROGRAM: When REPEAT is pressed in
the programme mode, the programmed track(s)
PRESET EQ
FLAT ROCK POPS JAZZ
on one disc or on all discs will be repeated.
PRESET EQ
FLAT ROCK POPS JAZZ
Random playback
You can play all the titles on all CDs in random
order.
PRESET EQ
• To do so, press RANDOM on the remote control.
RANDOM
FLAT ROCK POPS JAZZ
– 'RANDOM' appears in the display.
– The titles and discs are played in random order.
• Press RANDOM again to resume normal
playback.
PRESET EQ
Scan function
PRESET EQ
• Press M SCAN on the remote control to play the
first ten seconds of each track on all discs in the
CD tray.
• Press M.SCAN again while a desired track is
PRESET EQ
FLAT ROCK POPS JAZZ
playing to resume normal playback.
Playing a programme
• Press CD B; to play the programmed tracks.
• Adjust the VOLUME control as desired.
– Play stops at the end of the programme
sequence or when 9 is pressed.
– Press CD PROGRAM again, the PROGRAM
PRESET EQ
indicator will disappear (for normal playback).
However, the programme sequence will remain
in memory.
PRESET EQ
• To play the program sequence again, press first
the CD PROGRAM button.
– The PROGRAM indicator will light up.
• Then press CD B;.
Adding tracks to a programme
PRESET EQ
• To add a track to the programme, press the CD
PROGRAM button and the last programme
number will be displayed.
• Programme the next track according to the
normal programming procedure.
– New tracks can only be added at the end of the
programme.
– Also, tracks cannot be added to the programme
during playback.
Deleting programmed tracks
• To delete all programmed tracks from the
memory, press the 9 button during 3 seconds.
• You can also delete the last track from the
programme by pressing CLEAR on the remote
control.
TIMER
Setting the Sleep Timer
You can let the unit switch off at a preset time
STEREO
PRESET
period.
FLAT ROCK POPS JAZZ
This allows you to fall asleep while listening to
music.
STEREO
PRESET
• Press SLEEP on the remote control.
FLAT ROCK POPS JAZZ
– SLEEP90 appears on the display
• The 'sleep' time can be reduced in 10 minutes
STEREO
PRESET
steps from 90 minutes to 'off', by pressing
repeatedly the SLEEP button.
Timer
PRESET
The system can switch on to CD or TUNER mode
automatically at a preset time.
It can serve as an alarm to wake you up.
PRESET
• Before setting the timer, make sure the clock is
set correctly.
• The volume of the timer will be at the last setting
PRESET
before the set was switched off.
• The timer works every day on the same time
unless it is switched off or cancelled.
PRESET
• The volume of the timer will be at the last setting
before the set is switched off.
• If both Sleep Timer and normal Timer are set
simultaneously, the Sleep Timer has the priority in
PRESET
operation.
PRESET
PRESET
CASSETTE DECK
Recording (deck A only)
Cassette playback
Playback on deck A or B
Recording from the CD-player
• Press 9// to open the cassette holder of
• Press TAPE to switch the system on and to
deck A.
select the cassette deck.
• Insert a blank cassette.
• Press 9// on deck A and/or B to open the
• Press the CD B; button twice to select the
cassette holder.
pause mode.
• Insert a recorded cassette.
• Press 0 RECORD
• Press B and playback will
– The CD player starts automatically.
start.
– When the end of the tape is reached, the
• Adjust the sound using the
recording will stop.
VOLUME control.
• Press 9// if you want to stop recording before
– Playback stops when the tape in the deck
the end of the tape.
reaches the end.
Recording from the radio
• For brief interruptions, press ;.
• Press 9// to open the cassette holder of
– To restart playback, press this button once more.
deck A.
• To stop, press 9// on deck A or B
• Insert a blank cassette.
– When the end of the tape is reached the B
• Press the TUNER button.
button is released.
• Tune to desired radio station
Continuous play
• Press the ; button and then the
• Press both 9// buttons and insert a recorded
0 RECORD button on Deck A.
cassette in both decks.
– The B button will go down automatically.
• Press B on deck B. Then press ; and B on
• Release the ; button to begin recording.
deck A.
– When the end of the tape is reached, the
– Playback begins with deck B.
recording will stop.
– Playback stops when the tape in deck B
• Press 9// if you want to stop recording before
reaches the end.
– The ; button will automatically be released
the end of the tape.
and playback continues with deck A.
Automatic level control
• To stop, press 9// on deck A and B.
– The set is then switched off.
This unit has a built-in automatic level control circuit
that electronically adjusts the recording level from
Note: When you press 9// on deck B,
any source. Therefore, recording and dubbing are
playback will continue with deck A.
not affected by the settings of the VOLUME, DSC,
or BASS BOOST controls.
Setting the Timer
• Select the desired source CD or TUNER and
SLEEP
PRESET EQ
insert a CD or select a station.
• Press TIMER SET.
SLEEP
– The display will show 'ON', the actual time and
PRESET EQ
the hour indication flashes.
• Press SKIP/SEARCH S or T to set the hour
SLEEP
for the timer to start.
PRESET EQ
FLAT ROCK POPS JAZZ
• Press TIMER SET again.
– The minute indication flashes.
• Press SKIP/SEARCH S or T to set the
minutes for the timer to start.
PRESET EQ
FLAT ROCK POPS JAZZ
• Press TIMER SET again.
– The display will show 'OFF' the time and the hour
indication flashes.
PRESET EQ
FLAT ROCK POPS JAZZ
• Press SKIP/SEARCH S or T to set the hour
for the timer to stop.
TIMER
PRESET EQ
• Press TIMER SET again.
FLAT ROCK POPS JAZZ
– The minute indication flashes.
• Press SKIP/SEARCH S or T to set the
TIMER
PRESET EQ
minutes for the timer to stop.
FLAT ROCK POPS JAZZ
• Press TIMER SET again.
– The display shows the start time, followed by the
PRESET EQ
stop time and then the original display again.
FLAT ROCK POPS JAZZ
• Press TIMER MODE
– The display will show the TIMER flag.
PRESET EQ
FLAT ROCK POPS JAZZ
• Press ON/OFF y to switch off the set
You can also use the SLEEP TIMER to turn the unit
STEREO
off at a preset time.
PRESET EQ
FLAT ROCK POPS JAZZ
MHz
DUBBING - Copying from deck B to A
• Press the TAPE button.
• Press both 9// buttons and
insert a recorded cassette into
deck B and a cassette which
is suited for recording into
deck A.
• Press the ; button and then
the 0 RECORD button on Deck A.
– The B button will go down automatically.
• Press the B button on Deck B; the ; button on
Deck A will be released and dubbing will start.
– The tape in Deck A will stop at the end of the
first side.
– The tape in Deck B will play one side of the
tape and then stop.
• To stop dubbing before the end of the tapes,
press both 9// buttons.
Full automatic stop
• Decks A and B have a built-in Full Automatic
Stop System that stops the tape when it reaches
the end in all modes.
• To stop the tape before it reaches the end, press
the 9// button.
Werbung
Inhaltsverzeichnis
