Inhaltsverzeichnis
Werbung
Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions the part number of which is indicated in the
relevant spare parts list.
REMOTE CONTROL
Changing batteries
If the range of your infrared remote control seems to
decrease, or if certain functions can no longer be
carried out, you should replace the batteries.
• Two mignon 1.5Volt LR03, size AAA batteries
are required.
• To change the batteries, open the compartment
on the back of the remote control. Ensure that the
batteries are inserted properly (note the markings
in the compartment).
Note on Environmental Protection
Do not throw exhausted batteries in the household
refuse. Hand over the old batteries to your dealer
or public collecting points when buying new ones.
General functions
ON/OFF y - to turn the unit on and off.
MUTE - to turn off the sound. Press again to restore
the sound.
VOLUME C/D - Press the D button to decrease the
volume and press the C button to increase the
volume. Each time the unit is turned on, the volume
is automatically set to the previous level.
B.BOOST - to switch on and off dynamic bass
boost.
SLEEP - to set a time for the unit to switch off
automatically.
RADIO functions
TUNER/BAND - to select the TUNER function and to
select between the tuner bands AM and FM.
FM MODE - to select FM auto (stereo) or mono
reception.
PRESET 3 4 - to cycle through the 30 presets in the
FM and AM band.
FRONT PANEL CONTROLS
2
3
1
3 - DISC CD CHANGER
HIFI STEREO MINI SYSTEM
KM13
BASS BOOST
BASS
BOOST
REMOTE SENSOR
REMOTE
SENSOR
30 STATIONS
PRESET MEMORY
DISC
DISC SELECT
SELECT
C
1
2
3
ON/OFF
PRESET
ON/OFF y
S SKIP/SEARCH T
CD
TUNER
a B;
TAPE
PRESET
D
9
PHONES
SKIP/
SEARCH
PRESET
DECK A
RECORD/PLAYBACK
CD SYNCHRO RECORD
FULL AUTOMATIC STOP
0 RECORD
B
Q
R
9//
;
B
Q
DECK A
CD functions
CD 2/; - to select the CD function and to start
playback. Press again during playback to
temporarily stop playback. Press again to resume
playback.
STOP 9 - to stop CD playback or to clear a
program.
DISC SELECT 123 - to select one of the discs
to be played.
M.SCAN - to play the first ten seconds of each
track on the discs in the tray.
SKIP S/Q - Press briefly to skip to the
beginning of the present track. Press again to skip
to the beginning of previous tracks.Press and hold
during playback to search backwards through the
disc.
SKIP R/T - Press briefly to skip to the
beginning of the next track. Press and hold during
playback to search forward through the disc.
RANDOM - to activate random playback.
REPEAT - to playback one track, one disc or all
three discs repeatedly.
TIME - to change the information shown on the
display between elapsed playing time, remaining
time of the current track or remaining time of the
disc being played.
PROGRAM - to program tracks to be played.
CLEAR - to erase a programmed track.
CHECK - to review the contents of a programme.
TAPE functions
TAPE - to select the TAPE function.
Amplifier controls
ON/OFF y – Switches the unit on or to standby
(the 6 lights always up when the unit is connected
to the mains).
REMOTE SENSOR – To receive signals from the
remote control.
BASS BOOST – To enhance the bass response.
DSC – Digital Sound Control - to select the desired
MEMORY
sound effect: JAZZ, POP, ROCK or FLAT.
AUTO STORE
VOLUME – To adjust the volume level.
CD PROGRAM
CD B;/TAPE/TUNER – To activate the set and
DIGITAL SOUND CONTROL
CLOCK
select the desired programme source. When
DSC
MEMORY
CLOCK
CD B; is pressed, playback will start immediately
DSC
in case a CD is inserted.
AUTO STORE
SET
TIMER
p – connection for headphones.
CD PROGRAM
TIMER
MODE
Radio controls
VOLUME
TUNER – To switch on the radio and to select the
a /
waveband AM or FM.
OPEN/CLOSE
/
PRESET CD – To select preset stations.
OPEN/CLOSE
SKIP/SEARCH S T – Press the T button
to tune to higher frequencies and the S button to
tune to lower frequencies.
VOLUME
MEMORY –To program preset stations.
TUNER
AUTO STORE –To store up to 30 stations
CD
TAPE
automatically.
Clock/Timer controls
DECK B
PLAYBACK
S SKIP/SEARCH T – to set the hour and
minutes for the clock or timer.
R
9//
;
CLOCK – to set or display the clock.
DECK B
TIMER SET/CLOCK LIGHT – to set or display the
On/Off time, and to light up the display for
checking the clock when the power is off.
TIMER MODE – to activate the timer.
CONTROLS
CD player controls
To turn the unit on and off
CD B; – to switch on the CD player and to start
• Press the ON/OFF y button on the main unit
or interrupt CD play.
or on the remote control to turn the unit on.
9 – to stop CD playback or to clear a program.
• Press ON/OFF y again to turn the unit off.
S SKIP/SEARCH T – press briefly to skip to
• When the unit is turned off either by the
previous and next tracks. Press and hold during
remote control or the main unit, the standby 6
playback to search forward or backward through
indicator will light up.
the selected disc.
Note: Even if you switch your unit off, it remains
CD PROGRAM – to program track numbers in the
connected to the mains power supply. If you
memory.
want to completely disconnect the unit from the
power supply, remove the plug from the mains
OPEN/CLOSE / – to open and close the CD tray.
socket.
DISC SELECT 1~3 – to turn the rotary CD tray in
order to select a CD.
Automatic Power on
• If you press TUNER, CD B; or TAPE on the
Cassette deck controls
main unit, the unit will be switched on auto-
matically and the respective source is chosen.
controls for DECK A
0 RECORD – to start recording.
Setting the clock
2
– to start cassette playback.
5
– fast rewind.
• Press while the unit is switched off (standby) the
6
– fast forward.
CLOCK button during 3 seconds.
9//
– to stop and eject the cassette.
– '--:--' appears on the display.
;
– to interrupt playback.
• Set the hour with SKIP/SEARCH S and
T.
controls for DECK B
• Press the CLOCK button again.
2
– to start cassette playback.
5
• Set the minutes with SKIP/SEARCH S and
– fast rewind.
6
T.
– fast forward.
9//
– to stop and eject the cassette.
• Press the CLOCK button one more time.
;
– to interrupt playback.
– The clock starts working.
To check the clock
• Press the CLOCK button.
– The clock is displayed for 5 seconds
SOUND CONTROL
VOLUME control
STEREO
• Turn the VOLUME control to the right or left to
FLAT ROCK POPS JAZZ
increase or decrease the volume level.
• You can also press VOLUME C or D on the
remote control.
– The display will show the volume level
– When the unit is turned on, the volume will be
set to the previous level.
MUTE
• Press the MUTE button on the remote control to
temporarily switch off the sound
STEREO
– MUTE blinks on the Display.
FLAT ROCK POPS JAZZ
• Press the MUTE button again to restore the sound
– MUTE will disappear.
BASS BOOST
• Press BASS BOOST to enhance the bass
response.
– BASS BOOST lights up on the display.
• Press BASS BOOST again to switch the function
off.
Digital Sound Control
MEMORY
The DSC feature creates a realistic atmosphere for
the style of music you select.
• To enjoy a special sound effect, press several
PRESET
time the DSC button.
– A frame on the display will show the selected
effect: FLAT, ROCK, POPS or JAZZ.
OPERATION
p (Headphone) Jack
A headphone jack is provided for private listening.
• To listen to the unit with headphones, set the
volume to minimum and insert the 3.5mm mini
plug from the headphones into the p jack.
– The speakers will be disconnected when the plug
is inserted in the jack.
Display light
• Press CLOCK LIGHT when the power is off.
– The background light of the display will be
turned on during 5 seconds
RADIO
Radio reception
B.BOOST
• Press TUNER to select the radio and the desired
PRESET EQ
waveband. AM or FM.
• Press FM MODE on the remote control to select
FM auto (stereo) or mono reception.
– When stereo is selected, the MONO indicator
MONO
PRESET EQ
FLAT ROCK POPS JAZZ
will disappear. The STEREO indicator lights up
STEREO
PRESET EQ
MHz
FLAT ROCK POPS JAZZ
when receiving a stereo station.
MHz
• Press SKIP/SEARCH S or T for one
second, the frequency display will change until a
station with sufficient strength is found.
• If you wish to tune to a weak station, press
SKIP/SEARCH S or T repeatedly until the
B.BOOST
PRESET EQ
display shows the right frequency and/or
optimum reception has been obtained.
Storing Preset Stations
You can store up to 30 stations in the FM and AM
waveband in the memory.
Automatic programming
• Press AUTO STORE. MEMORY blinks on the
display. The tuner will start searching for stations
first in the FM band and then in the AM band.
It will stop searching when all the available stations
are stored or the memory for 30 stations is used.
Manual programming
• Tune to the station to be programmed.
STEREO
PRESET EQ
• Press MEMORY. MEMORY blinks on the display.
FLAT ROCK POPS JAZZ
MHz
• Press the PRESET CD buttons to select a preset
number
STEREO
PRESET EQ
FLAT ROCK POPS JAZZ
• Press MEMORY again to store the station.
MHz
– PRESET appears on the display
• Repeat above procedure for each station to be
stored.
• If you wish to listen to a stored station, select the
preset number by pressing PRESET CD.
Werbung
Inhaltsverzeichnis
