Dismounting And Disposal - Tecsis P2600 Betriebsanleitung

10. Dismounting and disposal

10. Dismounting and disposal
GB
9.1 Dismounting
Only disconnect the pressure gauge once the system has been depressurised!
9.2 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an
environmentally compatible way and in accordance with the country-speciic
waste disposal regulations.
Disposal by tecsis in accordance with order. Please note the paragraph on
"Hazardous Working Materials" when sending instruments for disposal
(see point 9).
Disposal recommendations in the case of disposal by customers:
- First dismantle parts not coming into contact with the hazardous material
in the case or hazardous materials in and on the instrument
- Parts not in contact with hazardous material  scrap according to material
- Parts coming into contact with hazardous material  special waste
- Mounted parts, plastic
- Mounted parts, metal
- Electronic components
Information on the materials and components used can be seen from the type
sheet for the instrument (if not available please ask for copy). In the case of
special features deviating from the contents of the mentioned type sheet these
are to be taken from the tecsis conirmation of order when order is placed.
Technical alteration rights observed.
24
WARNING!
Residual media in dismounted pressure gauges can result in a
risk to persons, the environment and equipment. Take suficient
precautionary measures.
 scrap, plastic
 scrap according to material
 special waste, suitable disposal
Operating instructions