Safety; Intended Use - Tecsis P2600 Betriebsanleitung

2. Safety

2. Safety
GB

2.1 Intended use

These differential pressure gauges are used for monitoring differential pressures
in industrial applications.
The differential pressure gauge has been designed and built solely for the
intended use described here and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.
2.2 Personnel qualiication
16
WARNING!
Before installation, commissioning and operation, ensure that
the appropriate pressure gauge has been selected in terms of
measuring range, design and speciic measuring conditions.
Observe the selection and installation recommendations for
pressure gauges in accordance with EN 837-2.
Check the compatibility with the medium of the materials
subjected to pressure!
In order to guarantee the measuring accuracy and long-term
stability speciied, the corresponding load limits must be
observed.
Non-observance can result in serious injury and/or damage to
the equipment.
Further important safety instructions can be found in the indivi-
dual chapters of these operating instructions.
WARNING!
Risk of injury should qualiication be insuficient!
Improper handling can result in considerable injury and damage
to equipment.
„
The activities described in these operating instructions may
only be carried out by skilled personnel who have the qualii-
cations described below.
Operating instructions