Using The Function Keys - Klarstein Townhouse Bedienungsanleitung

EN
24

USING THE FUNCTION KEYS

When the unit is switched on, the power indicator is off. When the unit is connected to
power, a beep is heard. The unit is now in standby mode. If no button is pressed for
more than one minute, the indicator light and screen will darken to 30% of the previous
brightness level. If you then press any button, the indicator light and the screen will turn
bright again.
If you press the On/Off button during power off to start the main engine, the preset
operating mode is started. (Note: Only if the power plug has been removed from the
outlet first can the unit enter the preset operating mode; if the unit is turned off without the
power plug having been removed, the next time the unit is started the operating mode
used before it was turned off will be automatically restarted. This does not apply to the
timer function and the wind function). These preset operating modes are available:
• Normal wind mode, no LED display.
• Power indicator is on.
• Vibration display is off.
• Dehumidification display is off.
• Medium wind is started and changes to weak wind after three seconds. The low
speed indicator is on.
• The timer function is off.
• The room temperature display is on.
• The room temperature is displayed on the screen.
Speed button
If you press this key several times after switching on, the wind speed can be adjusted in
the following order: slow > medium > fast > mute > slow and starts from the beginning if
you press it several times. The corresponding speed indicator will illuminate.
Note: The device can only be muted in normal mode, in all other modes this is not
possible.