Further Functions; Memory Function - Klarstein Wildwater Handbuch

EN
Speed
This product has four types of speed levels. Press the Speed button several times to
adjust the speed. When the highest speed is set and you press the button again, you will
return to the lowest speed.
Setting the Off Timer
Press the Timer/Preset button on the control panel or on the remote control several times
when the power is on to set the off timer in the following order: 1 > 2 > 3 > 4 > 5 > 6 >
7 > off. The corresponding numbers light up on the display.
Setting the power-on timer
In standby mode, press the Timer/Preset button on the control panel or remote control
repeatedly to set the on timer in the following order: 1 > 2 > 3 > 4 > 5 > 6 > 7 > off. The
corresponding numbers light up on the display.

FURTHER FUNCTIONS

Automatic display switch-off
If no input is made for more than 40 seconds when the unit is switched on, all displays
go out. The display can be reactivated by pressing any key (except On/Off).

Memory function

This product is equipped with a memory function. When the fan is switched off, it stores
the current operating status. When the fan is switched on again, it starts in the stored
operating state. However, if the unit was in sleep mode before it was switched off, it
switches to natural wind mode after it is switched back on.
17