Telephone Operation - AEG Voxtel C100 Schnellstartanleitung

Mark two points on the wall that are 80 mm apart to lay the fixing centres as shown below.
BE CAREFUL to check that there are no pipes or electrical wires hidden in the wall.
Fix two screws (7mm head screws required, not supplied) at the marked locations, leaving approximately
7mm between the wall and the screw head.
Hang the telephone on the screws using the wall mount slots. You may need adjust the screws so that
the telephone is securely fixed and does not wobble.
Place the handset on the cradle with the parking hook on the cradle arranged to fit in the parking
recess under the earpiece on the handset.
6

TELEPHONE OPERATION

6.1 Ringer volume
The ringer high/low switch
of the ringer.
High volume
Low volume
6.2 Making a call
Lift the handset, listen for a dial tone.
Dial the telephone number you wish to call.
To end the call, return the handset to the base unit.
6.3 To answer a call
Lift the handset to answer a call.
6.4 To end a call
Replace the handset on the base unit cradle.
6.5 Last number redial
Lift the handset and listen for dial tone.
Press the redial button
>The phone automatically dials the last number you called (maximum of 32 digits).
lay the centres as
parking recess
located at the back of the base unit allows you to adjust the volume
.
parking hook
rotate
5