Grundig RR 630 CD Handbuch Seite 17

CD operation via the remote
control (only RR 660 CD)
The buttons PLAY/PAUSE 2;, STOP 9, R-
SKIP 5 and F-SKIP 6 on the remote
control have the same functions as the
corresponding buttons on the unit.
MODE button
In STOP mode:
• In STOP mode, the MODE button on the
remote control has the same function as
the PROG. button on the unit.
During CD playback:
• Press once to repeat one track.
• Press again to repeat all tracks on the
CD.
• Press again to play all tracks on the CD
in random order.
• Press one more time to go back to
normal playback
REPEAT 1 REPEAT ALL RANDOM NORMAL
During playback of a CD programme:
• Press once to repeat one track.
• Press again to repeat all tracks on the
CD programme.
• Press one more time to go back to
normal playback
REPEAT 1 REPEAT ALL NORMAL
CD PLAYER
Programming
By programming the player you can play up to 21 tracks in any desired order. If you exceed
the maximum of 21 tracks, the programme function will start again from the first track.
Storing a programme
• In STOP mode, press PROG..
The indicator 6 in the PROG. button starts blinking and the display will show '01'.
• Select the first desired track using R-SKIP Q or F-SKIP R.
– The track number blinks on the display and the indicator 6 in the PROG. button lights up.
• Store this track by pressing PROG. again.
The indicator 6 in the PROG. button starts blinking again and the display will show '02'.
• Select and store in this way all desired titles.
• Press PLAY/PAUSE 2; to start playback of the programme.
Checking the programme
• In STOP mode, press PROG..
– The indicator 6 in the PROG. button starts blinking
• Press PLAY/PAUSE 2; to start playback of the
programme.
• Press F-SKIP R repeatedly: the display shows
in sequence all programmed track numbers and
playback of the respective track starts.
Changing the programme
Adding tracks to the programme
• Press PROG. repeatedly until the display shows the
first empty memory location (the largest number).
• You can now add tracks to the sequence as
described above (up to 21).
Replacing previously programmed tracks
• Press PROG. repeatedly until the display shows
the step you wish to replace.
• Select the track you want to enter in its place.
• Store this track by pressing PROG..
Playing a programme
• Press PROG. once.
– The indicator 6 in the PROG. button starts blinking
• Press PLAY/PAUSE 2;.
– Play starts with the first track of the programme.
– The indicator 6 in the PROG. button lights up.
– After the last track playback stops.
– The total number of tracks will then appear on
the display.
• Press STOP 9 to stop playback.
• While playing a programme, it is possible to
use R-SKIP Q or F-SKIP R to select the
desired programmed tracks.
Erasing a programme
• Press PROG. (the indicator 6 in the PROG. button
starts blinking) and then STOP 9.
• You can also erase the programme:
– by opening the CD door using OPEN/CLOSE;
– if you move the FUNCTION selector;
– if the batteries are exhausted or if the power
supply is interrupted in another way.
GB
17