E Nviro N M E Ntal Req U Ire M E Nts - Indel B RM7 Bedienungsanleitung

RM7
ONLY FOR SALE WITHIN THE EUROPE AN
COMMUNIT Y (EU)
This appliance is marked in conformity with European Directive 2012/19/EU (WEEE).
The symbol on the product indicates that it should not be disposed of as household
waste.
Ensure that this product does not enter the municipal waste disposal system but is
disposed of as WEEE for professional use.

E NVIRO N M E NTAL REQ U IRE M E NTS

Respect the following environmental requirements for a correct maintenance of the device:
• Avoid the presence of corrosive substances such as salts and acids, which can damage the electrical
and plastic components of the device.
• Keep dust deposits to a minimum, as dust particles can reduce the performance of the device.
• Keep the humidity of the area where the device operates at between 10% and 80%.
• Do not place the device near sources that generate temperature variations. The device should be
stored at temperatures of between -15°C and 60°C.
• See the TECHNICAL DATA paragraph for the operating temperature of the device.
Warning! Health hazard!
Check that the heating capacity of the device is sufficient for the preservation of the articles intended to
be heated.
The device has been designed and built to operate in environments with the temperatures indicated in
manual for use and maintenance. The performance indicated by the Manufacturer cannot be obtained in
places with different characteristics.
Storage temperature
Transportation temperature
Humidity:
Atmospheric pressure
RM7_(DC)_IM_20190723
-15°C to +60°C
-15°C to +60°C
10% to 80%
70000 Pa to 106000 Pa
30