Changing The Radio Channel - Tractel dynafor LLX1 Serie Gebrauchs- Und Wartungsanleitung

7. CHANGING THE RADIO CHANNEL

16 channels are available on the 2.4 GHz frequency.
The assembly operation channels are allocated in a random fashion in the factory.
Within a radius of 40 m (obstacle free), up to 16 assemblies can be operated, each on its own channel.
Please consult the manufacturer if more than 16 channels are required.
To change the channel of an assembly, start by changing the channel of the display unit and use the
synchronisation procedure for an LLX1 system (§ 7.1) to automatically change the channel of the sensor
and match-up the set.
To change the radio channel, follow the instructions described hereafter:
Using the arrows, move to the icon:
Display
41
and confirm with
Action
Return to standard display
ESC
Return to standard display
Increment the channel Nos.
Decrement the channel Nos.
19
.
Comments
Radio network parameter
settings:
C: 8 = No. of radio channel
Select C:08 and confirm
Select another channel.
Confirm with
The display unit will search for and
identify the units present on the
selected channel.
If several LLX1 units are present,
only the LLX1 with the smallest
address will be displayed.
GB