Tractel dynafor LLX1 Serie Gebrauchs- Und Wartungsanleitung Seite 26

CAUTION. Possible situation. Hazardous. Risk of slight injury or damage of the appliance.
Appliance completely protected by double or reinforced insulation.
1. Before installing and using this unit, to ensure safe, efficient use of the unit, be sure you have read and fully
understood the information and instructions given in this manual. A copy of this manual should be made
available to every operator. Extra copies of this manual can be supplied on request.
2. Do not use the unit if any of the plates mounted on the unit are missing or if any of the information on the plates,
as indicated at the end of the manual, are no longer legible. Identical plates will be supplied on request; these must
be secured on the unit before it can be used again.
3. Make sure that all persons operating this unit know perfectly how to use it in a safe way, in observance of all safety
at work regulations. This manual must be made available to all users.
GB
4. The positioning and commissioning of this appliance must be carried out under conditions that ensure installer
safety in compliance with the relevant regulations.
5. Each time, before using the unit, inspect the unit for any visible damage, as well as the accessories used with the
unit. Never use an appliance that is not obviously in good condition. Return the appliance to the manufacturer for
servicing if any anomalies arise that have no connection with the state of the battery.
6. Protect your appliance from any form of impact, especially the display unit.
7. The unit must never be used for any operations other than those described in this manual. The unit must never be
used to handle any loads exceeding the maximum utilization load indicated on the unit. It must never be used in
explosive atmospheres.
8. This appliance should never be used for man-riding applications without a thorough prior check that the utilization
coefficients required for personnel safety have been applied, and more generally that the safety regulations for the
load line on which it has been installed have been applied.
9. Tractel ® declines any responsibility for use of this unit in a setup configuration not described in this manual.
10. Tractel ® declines any responsibility for the consequences of any changes made to the unit or removal of parts.
11. Tractel ® declines any responsibility for the consequences resulting from disassembly of the unit in any way not
described in this manual or repairs performed without Tractel
original parts by parts of another manufacturer.
12. As a dynafor™ dynamometer is a lifting accessory, the safety regulations applicable to this category of equipment
must be applied.
13. If the unit is to be definitively removed from use, make sure the unit is discarded in a way which will prevent any
possible use of the unit. All environment protection regulations must be observed.
14. Any operation of this appliance in conjunction with supplementary equipment relaying signals on an operating
system must be preceded by a risk analysis related to the operating functions implemented, carried out by the
system user or assembler, and all appropriate measures are taken as a consequence.
15. Certified in compliance with European regulations, this appliance should be checked for compliance with the
regulations of any other country where it might be used, prior to being commissioned there.
16. The display power supply unit is used as a breaker and must be accessible at any time.
PRIORITY RECOMMENDATIONS
4
® authorization, especially as concerns replacement of