Noise/Vibration Information; Description Of The Symbols - Ayce 2717 Gebrauchsanweisung

e) Maintain power tools and accessories. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may affect
the power tools' operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5. Service
a) Have your power tool serviced by qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 62841-1.
WEAR HEARING PROTECTION!
Vibration total values (triax vector sum) determined according to EN 62841-1: The
vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 62841-1 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
180731_ayce_2717_IM

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
This symbol, marking a point of safety, indicates a
!
caution, warning or danger. Ignoring this warning can
result in an accident to yourself or others. To limit the
WARNING
risks of injury, fire or electrocution, always follow the
recommendations indicated.
Before any use, refer to the corresponding section in
this user manual.
These symbols indicates the requirement of wearing
gloves, eye protection, ear protection, and respirator
when using the product.
Conform to CE safety standards
Class II symbol: this machine is designed with double
insulation. It is not necessary to connect it to an
earthed power socket.
Recycle unwanted materials instead of disposing of
them. All appliances and packaging should be sorted
and tendered at a regional recycling centre into to be
processed in an ecological manner.
Proven safety of the federal inspectorate for heavy
current installations ESTI.
84 85 | GB
GB
180731_ayce_2717_IM