Inhaltsverzeichnis
Werbung
Cleaning and care
1. Turn the machine off and let it
cool down. Wipe all outer surfaces
with a damp cloth. In case the filters
get clogged, separate them with a
coin and clean them.
4. Decalcifying is recommended
regularly, depending on water hard-
ness. Remove the brewing head
(keep components together) before
filling the tank with water and
decalcifyer according to product
instructions.
2. When the level indicator is visible
above the drip grid, the drip tray
must be emptied. Lift out the drip
grid, empty, rinse and dry the grid
and tray. For hygienic reasons we
recommend to do this regularly
even if the level indicator is not vis-
ible above the drip grid.
5. Switch the machine on and let it
heat up. Place the filter holder in
position, without any filter. Place a
bowl on the drip grid. Push the two
cup button a few times and let 1/4
of the water pass through. Turn the
machine off and wait for 10 min-
utes. Repeat this procedure with
another 1/4 of decalcifying solution.
3. Loosen the steam nozzle and
wash it under running water. Clean
the small pipe with a cloth. Lift out
the water tank and rinse it under
running water.
6. Push the hot water button and
let the remaining solution flow
through the steam nozzle. Fill the
water tank with fresh water and run
the machine until the tank is empty.
Repeat twice, with fresh water. Re-
install components and fix filter
properly.
d
GR
NL
F
GB
19
Werbung
Inhaltsverzeichnis
