Timer Set-Up - Dalla Corte EVO2 Benutzerhandbuch

• Use (PD1) and (PD2) to change the mode.
• Push again to confirm.
• Finally, push ESC to go back to main menu.

4. Timer set-up

This machine is equipped with a weekly ON/OFF
timer for each group and for the boiler.
All timers can be set up independently from one
another and allow the user to set the ON/OFF/SA-
FETY modes of each group on a daily basis.
• Push (PD3) to access the menu.
4-1 Enable
• Push (PD3) to access the menu.
• Push (PD3) to highlight the mode to be changed
in order to enable the timer.
• Use (PD1) and (PD2) to change the mode by se-
lecting YES and push (PD3) again to confirm.
• After enabling, push ESC to go back to the pre-
vious menu.
• After timer enabling, menu 4 will display the days
of the week that can be programmed.
55