Cleaning And Maintenance - Silvercrest SSE 4.5 B2 Bedienungsanleitung

2) Hold your hand underneath the soap outlet 7. The appliance starts
dispensing soap.
3) As soon as dispensing stops, you can withdraw your hand.
NOTE
► The soap dispensing also stops as soon as you withdraw your hand. This
is true even if the programmed quantity has not yet been dispensed.
4) If you do not intend to use the appliance for long periods, press the "-"
button 9 repeatedly until "OFF" appears in the display 8:
5) Press the "+" button 0 to turn the appliance back on.
NOTE
► If you need to remove a large quantity of soap from the soap tank, you
can let the soap dispensing run for 30 seconds:
Press the "+" button 0 and the "-" button 9 simultaneously and hold them
for about three seconds. The appliance begins dispensing soap and stops
after 30 seconds.
NOTE
► If you have not used the appliance for several days, you may have to
activate the soap dispensing function several times in a row before soap
is dispensed again.

Cleaning and maintenance

Turn off the appliance by pressing the "-" button 9 repeatedly until "OFF"
■
appears in the display 8.
■ Wipe the appliance with a damp cloth. If required, use a mild detergent on the
cloth.
If one of the sensors 5/6 is dirty, clean it carefully with a damp cloth.
■
The LED 4 cannot be replaced.
■
SRR 4.5 B2 GB 7 ■
│